Sun Fast 3300 'Rockit'
￡159,950
Specification
Boat Name: ROCKIT
Year: Built 2021 but not launched until 2022
Builder: Chantiers Jeanneau
Designer: Guillaume Verdier / Daniel Andrieu
LOA: 33 ft 2 in / 10.11m
LWL: 29 ft 2 in / 8.90m
Beam: 11 ft 1 in / 3.40m
Draft: 6 ft 5 in / 1.95m
Displacement: 3500kg
Engine: Yanmar 2YM15 14hp
Keel: Deep cast iron-lead keel
Cabins: 2 x cabins, 1 x head
Shipping: Cable with hull formers
Location: Universal Marina, Hamble River
Description
The Verdier/Andrieu designed Jeanneau Sun Fast 3300 has excelled Internationally in the offshore short-handed racing scene in both IRC and ORC and enjoys a 20+ boat fleet in the UK. 3300’s are to be seen regularly featuring on the top steps of the 2025 JOG and RORC podiums.
“Rockit” was launched in 2022. She benefits from many custom upgrades such as a high modulus carbon rig, uprated water ballast system and a superb wardrobe of North Sails.
This boat is one of the most customized Sun Fast 3300’s delivered and she is ready to take her new owner to the top step on the podium. She has been lightly used in the last two seasons and is well presented in good condition.
Boat Video
Upgrades & Modifications
Faired keel to hull joint
Nautix A4 hard racing antifoul flatted back to smooth surface
Rig and deck preparation, stepping and tuning
Headstay foil
Detachable quick release rudders and bungee system
Complete custom rope kit by Kingfisher & BA Yachts
Complete custom commissioning and laser aligning by A “Ski” Haines
Additional foot bars on cockpit floor
Extended adjustable foot bar for helms person
Fabric companionway hatch cover
Labelled clutches
Mainsail reef shackles and dyneema strops, Cunningham, jib outboard reaching strops, runner retrieval lines, extra 2nd sprit tack line
Foredeck guardwire lines and bungee retainers for jib stowage
Spinnaker staysail tack point and halyard
Genoa staysail tack point
Extra pair of sheet blocks at aft end of boat (aids peeling)
Upgrade two deck clutches to ceramic jaws
Additional continuous spinnaker sheets, Zero sheet + tweaker, jib changeover sheets
Progrip foam decking – bow and helm
Detachable quick release rudders & bungee system
Additional foot bars on cockpit floor
Extended adjustable foot bar for helms person
Fabric “fold away” companionway hatch cover
Mooring kit: Outils Ocean flat fenders and warps
Anchor kit: Fortress FX-11 anchor, chain and warp
Mainsail cover
Spars & Rigging
AXXON high modulus white carbon mast + rod rigging
White carbon boom instead of standard aluminium boom
Asymmetrical spinnaker running rigging and bowsprit
Harken racing foil for headstay
2 x Harken winch handles One-Touch in lieu of standard
Custom rope bags in the cockpit
2 x Lee cloths in saloon
Water ballast 2 x 320 litre Custom + Gravity transfer + storage unit
Construction
Keel, Rudder & Steering
Hardware & Exterior
Interior
2 x saloon bench seats with back rests & lee cloths
Galley to port with storage bags in counter top
Stainless steel sink
Gimballed Jet Boil and 40L cool box
Chart table with storage
Electronics panel
Ergonomic moulded seats to port and starboard
Plumbed in sea toilet in the forepeak
LED strip lights in all cabins
Storage bins in aft cabins
Angle adjustable bunks in aft cabins
White composite floorboards in the main saloon have replaced the original wood floorboards. This gives a brighter, fresher feel, saves about 15kg in weight, and they are easier to lift for bilge inspections and cleaning
Engine, Mechanical
& Electrical
Type: Yanmar 2YM15
Power: 14hp diesel
Propeller: 2-blade folding Gori propeller
Drive: Shaft drive in faired housing
Tankage:
Fuel capacity: 50 litres
Water capacity: 80 litres
EFOY Comfort 210i Methanol fuelled DMFC fuel cell
Roamer 200AH Lithium battery + app for battery management
12v twin USB socket + 12v socket and cover
FourthCape E-BAR rudder toe angle adjuster system integrated with B&G H5000 display
FourthCape custom carbon weedwand
Smartune Uno 1/2″ forestay load cell interface to B&G H5000 displays
Electronics
B&G H5000 Hercules System Pack:
H5000 pilot including Raymarine Type 2 12v short shaft linear drive pilot ram
Precision 9 compass
Rudder reference and feedback unit
Motion sensor
2 x Graphic displays, one at each helm
2 x Pilot controllers, one at each helm
Flush fit H3000 speed sensor and DST800 depth sensor
Carbon VHMU (vertical mast head unit – wind sensor) + bracket
Triple 20/20 HV mast displays and bracket
NMEA 2000 cables + Ethernet, connectors
B&G Additional Options:
2 x Zeus35 9″ MFD mounted in cockpit
Navionics chart 28XG
Nemesis 9 + bracket and network expansion port and cables
H5000 Barometric pressure sensor
ICOM M10 VHF with DSC and AIS receive
Hawk VHF antenna
Go FREE wifi system
NAIS 5000 transceiver including GPS, antenna splitter
Actisense NGT-1-USB for H5000 data into laptop
Covers
Safety
10L water container
Handheld compass
Emergency VHF aerial
Softwood bungs large and small
Pair of jackstays
Fire blanket, 2 x 2kb ABC fire extinguishers
MED torch, 12v searchlight, spare 12v bulb
St. John’s first aid manual, Offshore first aid kit
Fog horn and canister
Jonbuoy danbuoy and horseshoe
Horseshoe with Apollo light
1M retro-reflective tape
KIM drogue and pocket
Whistle
Radar reflector
KIM rescue sling, throw line
RORC flare pack
Race rescue knife
Hacksaw and hacksaw blades
Anchor ball
Cat 2 compliant companionway hatch retaining strop
Cat 2 compliant internal bilge pump
Sails
Square top mainsail 3Di RAW 360 14,700 Dpi
Helix AP jib 3Di RAW 10,850 Dpi (26.5 sqm)
Helix J3+ Reef 3Di RAW 360 14,700 Dpi (24 sqm)
Jib heavy weather OSR Max complete with reef 3Di RAW 360 14,700 Dpi (22 sqm)
A1.5 Asymmetric SuperKote SK 60/75
A4 Asymmetric SuperKote SK 90/130
Helix MHO (75% smg) NPL Code Xi04 (TD furling)
Helix FRO (75% smg) NPL Code Xi04 (TD furling)
Storm Jib / GS 3Di Ocean 330 (Hi Vis painted NORDAC) 10,850 Dpi
Furlers for furling sails (Top Down on MHO & FRO)
